Asennusmalli: Pinta-asennus
Asennusmalli: Ruuviliitännällä
Lyhdyn muoto: LED
Lamppumalli: LED
Jännite: 12 V
Jännite: 24 V
Asennuspuoli: Ulompi
Asennuspuoli: Takana
Korkeus: 57 mm
Leveys: 75 mm
Pituus: 85 mm
Valotoiminto: Tunnuskilpivalolla (LED)
Suojaus (IP): IP6K6
Suojaus (IP): IP6K7
täyttää ECE-normin: R4
täyttää ECE-normin: R10
LED-määra: 2
Kopan väri: Musta
Lasin väri: Lasinkirkas
Määrä: 1
Tekniset tiedot
Regarding single or double function lamps with LEDs without
flasher function
In connection with these low powers, which are
very different from bulb versions, there can be
problems during operation on various traction vehicles
because further lighting functions are detected
by some traction vehicles. This is a vehicle
comfort function which is not required by legislation and
does not release drivers from their obligation
to see for themselves that the lighting equipment
is working.
Here, too, faulty diagnoses can be a result of the lower
power levels involved (instrument panel in the driver cab
indicates a bulb failure although the function
is working).
The functional ability of these light failure checks can
only be established by the vehicle manufacturer.
Operation of the light with alternating current or pulsed
direct current is not permitted!
The indiv
flasher function
In connection with these low powers, which are
very different from bulb versions, there can be
problems during operation on various traction vehicles
because further lighting functions are detected
by some traction vehicles. This is a vehicle
comfort function which is not required by legislation and
does not release drivers from their obligation
to see for themselves that the lighting equipment
is working.
Here, too, faulty diagnoses can be a result of the lower
power levels involved (instrument panel in the driver cab
indicates a bulb failure although the function
is working).
The functional ability of these light failure checks can
only be established by the vehicle manufacturer.
Operation of the light with alternating current or pulsed
direct current is not permitted!
The indiv
